Influence of the electric arc furnace dust in the physical and mechanical properties of EVA-polyethylene-butene blends
Rights accessRestricted access - publisher's policy
This study assesses the processing behaviour and mechanical properties of different thermoplastic polymers filled with Electric Arc Furnace Dust (EAFD). Design of Experiments (DoE) approach enabled the evaluation of the influence of each component and the interactions between them. There were prepared different composite formulations varying the content of EAFD. The mechanical properties and the melt flow index (MFI) of composites were selected as output responses and the effect of CaCO3, BaSO4 and EAFD fillers as well as different polymer matrixes were evaluated. It was observed that slight variations in the formulation yield to a broad range of response values. Polyethylene-co-vinyl acetate (EVA) concentration showed a significant effect on all responses. It was found that the presence of EAFD increased fluidity and decreased the elasticity modulus and the elongation at break. In addition, when added with barite, the presence of EAFD caused an increase of the tensile strength.
CitationNiubo, M. [et al.]. Influence of the electric arc furnace dust in the physical and mechanical properties of EVA-polyethylene-butene blends. "Materials science and engineering A. Structural materials properties microstructure and processing", 24 Maig 2011, vol. 528, núm. 13-14, p. 4437-4444.
- POLYCOM - Polimers i compòsits: tecnologia - Articles de revista 
- Departament de Ciència dels Materials i Enginyeria Metal·lúrgica - Articles de revista 
- Departament de Construccions Arquitectòniques II - Articles de revista 
- GICITED - Grup interdisciplinar de ciència i tecnologia a l'Edificació - Articles de revista 
|Influence of EAFD in the phyisical and....pdf||1.588Mb||Restricted access|