Constant-phase element identification in conductivity sensors using a single square wave
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/1284
Tipus de documentArticle
Data publicació2006-11-08
EditorElsevier
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper proposes a novel method to measure the electrical conductivity of solutions in the time domain by using a single square-wave current and two titanium electrodes. This method allows us to determine both the conductivity (σ) of the solution and the two parameters of the constant-phase element (CPE) due to the electrodes. Experimental results show that the proposed method achieves conductivity measurement ranges close to those obtained with platinum probes or tetrapolar measurements, which are more expensive, and provides information about electrode condition.
CitacióLario García, J.; Pallàs-Areny, R. Constant-phase element identification in conductivity sensors using a single square wave. Sensors and Actuators A: Physical, 2006, Vol. 132, No. 1, 122-128
ISSN0924-4247
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
RPallas_article_2006_1.pdf | 425,5Kb | Visualitza/Obre |