Intermatrix synthesis of polymer-stabilized PGM@Cu core–shell nanoparticles with enhanced electrocatalytic properties
Visualitza/Obre
reactive&functionalpolymers.pdf (1,258Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.reactfunctpolym.2011.05.009
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/12804
Tipus de documentArticle
Data publicació2011-05-27
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper is dedicated to the further development of the Intermatrix synthesis (IMS) technique, which permits to produce a wide variety of polymer–metal nanocomposites (PMNCs) containing monometallic or bimetallic catalytically active polymer-stabilized nanoparticles (PSNPs) with the most favourable distribution of nanocatalysts inside the polymer, which is achieved by the purposeful application of
the Donnan exclusion effect in the course of IMS. PMNCs containing low cost Cu-PSNPs can be used as an active element in construction of amperometric sensors for H2O2 detection. But, due to the high trend of copper nanoparticles (Cu-NPs) for oxidation under measurement conditions (in buffer solution) the sensors rapidly loose their sensitivity. The coating of Cu-NPs with platinum group metal-shell (PGMshell) of the minimal thickness results in the protection of Cu core against oxidation while maintaining
the sensitivity of core–shell NP-modified sensors at sufficiently high level. The sensitivity of the sensors in the last case enhances when applying the step-wise formation of PGM-shell of higher purity by excluding the shell contamination with core-metal.
CitacióRuiz, P. [et al.]. Intermatrix synthesis of polymer-stabilized PGM@Cu core–shell nanoparticles with enhanced electrocatalytic properties. "Reactive and functional polymers", 27 Maig 2011, vol. 71, núm. 8, p. 916-924.
ISSN1381-5148
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S1381514811001106
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
reactive&functionalpolymers.pdf | 1,258Mb | Accés restringit |