Characterization of two Ti-Nb-Hf-Zr alloys under different cold rolling conditions
Visualitza/Obre
Artículo JMEP.pdf (444,2Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/12790
Tipus de documentArticle
Data publicació2011-04-06
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The objective of this study is to obtain a new biomaterial to use in the load transfer medical implants field.
The influence of cold work in the thermoelastic martensitic transformation and elastic modulus was investigated for a previously developed Ti-24.8Nb-16.2Hf-1Zr alloy (A1) and a new Ti-35Nb-9Hf-1Zr alloy
(A2). The nanoindentation tests with spherical tip showed a decrease of the elastic modulus when increasing the cold work percentage. The lowest value (46 GPa) was achieved after the 95% reduction in thickness for A1. By contrast, the A2 alloy exhibits its lowest elastic modulus in the uncold-worked condition (58 GPa) and did not present evidences of thermoelastic martensitic transformation.
CitacióGonzález, M. [et al.]. Characterization of two Ti-Nb-Hf-Zr alloys under different cold rolling conditions. "Journal of materials engineering and performance", 06 Abril 2011.
ISSN1059-9495
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Artículo JMEP.pdf | 444,2Kb | Accés restringit |