PublisherIEEE Press. Institute of Electrical and Electronics Engineers
Rights accessOpen Access
Simultaneous Localization and Mapping (SLAM)
is perhaps the most fundamental problem to solve in robotics in order to build truly autonomous mobile robots. The sensors
have a large impact on the algorithm used for SLAM. In this work a novel method, called Filtered Inverse Depth Delayed
(FIDD) Initialization which is intended for initializing new features in Bearing-Only SLAM systems. Unlike range sensors which provide range and angular information, a bearing sensor (e.g. cameras) measures only the bearing (angular information) of features. Therefore depth information (range) cannot be obtained in a single step. This fact has propitiated the emergence of a new family of SLAM algorithms: the Bearing-Only SLAM methods, which mainly rely in especial techniques for features
system-initialization in order to enable the use of bearing sensors (as cameras) in SLAM systems. The proposed approach is based
in an inverse depth parameterization and delayed initialization scheme. The main idea is to incorporate to the SLAM process, an extra uncorrelated filter, which progressively incorporates the new bearing measurements needed to estimate the full state of each new feature. Several simulations are given in order to show the performance of the proposed approach.
CitationMunguia, R.; Grau, A. FIDD bearing-only SLAM. A: IEEE Industrial Electronics Society (IECOM). "IEEE 2010 International Symposium on Industrial Electronics". Bari: IEEE Press. Institute of Electrical and Electronics Engineers, 2010, p. 1858-1863.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org