Analysis of copper effect on microstructures and mechanical properties in microalloyed steels
Visualitza/Obre
isij vol[1].48 n.1 (2008).pdf (1,486Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.2355/isijinternational.48.107
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/12056
Tipus de documentArticle
Data publicació2008
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The microstructure and mechanical properties under cool deformation conditions was investigated for three steels of approximately 0.03% carbon with different alloying additions of niobium and copper. Compression testing of the three steels was employed to study the influence of processing conditions (cool deformation)
and chemical composition (niobium and copper) on the microstructure and mechanical properties.
Overall, for the steel compositions examined, the addition of copper increased the strength. This can be explained by solid solution hardening effect of copper. The results show that there is very fine equiaxed
ferrite that has formed, either by recrystallization or transformation induced by cool deformation
CitacióElwazri, A. [et al.]. Analysis of copper effect on microstructures and mechanical properties in microalloyed steels. "ISIJ international", 2008, vol. 48, núm. 1, p. 107-113.
ISSN0915-1559
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
isij vol[1].48 n.1 (2008).pdf | 1,486Mb | Accés restringit |