Influence of the chemical composition on transformation behaviour of low carbon microalloyed steels
Visualitza/Obre
sdarticle.pdf (655,5Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/11990
Tipus de documentArticle
Data publicació2009
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In order to design thermomechanical schedules for processing lowcarbon microalloyed steels, the various critical transformation temperatures, i.e. the start and finish of the austenite transformation (Ar3, Ar1) and the non-recrystallization temperature (Tnr), must be determined. Continuous cooling torsion and compression testing are useful ways to measure these values. In this study six low carbon microalloyed steels with different additions (Nb, Cu, Si and Mo) were examined using these techniques. Moreover, the equilibrium phase diagrams for each alloy were calculated using FactSage. The comparison of the thermomechanical testing results with the thermodynamic calculations leads to a better understanding of the effect of the different elements on the transformation behaviour of pipeline steels. Regarding
transformation temperatures, Cu in residual contents showed a strong effect on decreasing both Ar3 and Ar1, which indicates a hardenability effect of this element. On the other hand, increasing Nb contents
increased Tnr by accelerating Nb(C,N) precipitation. However, when Si was added to a Nb-microalloyed steel, the Tnr decreased.
CitacióCalvo, J. [et al.]. Influence of the chemical composition on transformation behaviour of low carbon microalloyed steels. "Materials science and engineering A. Structural materials properties microstructure and processing", 2009, vol. 520, núm. 1-2, p. 90-96.
ISSN0921-5093
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
sdarticle.pdf | 655,5Kb | Accés restringit |