Influence of the notch sharpening on the fracture toughness of bulk ethylene-propylene block copolymers
Visualitza/Obre
3sdarticle.pdf (1,478Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/11887
Tipus de documentArticle
Data publicació2010-03-02
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The effect of the notch sharpening procedure on the fracture toughness computed under
linear-elastic and elastic-plastic conditions (at low and high loading rates, respectively) of a bulk ethylene–propylene block copolymer has been investigated. The specimens utilized for fracture characterization were sharpened using a steel razor blade and the femtosecond
laser ablation technique. The crack growth initiation parameter, JIC, determined with the help of the elastic-plastic fracture approach, and the fracture toughness, KIC, obtained with specimens verifying linear-elastic fracture mechanics assumptions, of the steel razor blade sharpened samples were higher than that of the femtolaser sharpened specimens. The plastic deformation occurring ahead of the crack tip during the sharpening method seems to be the reason for the dissimilarity of the fracture values. Moreover, the strain hardening suffered by the material close to the notch tip reduces the stable crack growth resistance
evaluated under elastic-plastic conditions.
CitacióSalazar, A. [et al.]. Influence of the notch sharpening on the fracture toughness of bulk ethylene-propylene block copolymers. "Polymer testing", 02 Març 2010, vol. 29, p. 49-59.
ISSN0142-9418
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
3sdarticle.pdf | 1,478Mb | Accés restringit |