Active piezoelectric system using PCA
Visualitza/Obre
Active piezoelectric system using PCA.pdf (6,600Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/11644
Tipus de documentText en actes de congrés
Data publicació2010
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In previous work by the authors, an aircraft turbine blade was used to show that T and
Q-statistics formulation based in Principal Components Analysis (PCA) are successful indices to detect and distinguish damages. In this paper authors consider the advantage of using PZT’s as actuator as well as sensor. An active piezoelectric system is developed. In each phase of the diagnosis procedure, one PZT’s is used as actuator (a known electrical signal is applied) and the others are used as sensors (collecting the wave propagated through the structure at different points). An initial baseline model for undamaged structure is built applying Principal Components Analysis (PCA) to the data collected by several experiments. Current structure (damaged or not) is subjected to the same experiments, and the collected data are projected into de PCA model. Two of these projections and the damage indices (T-statistic and
Q-statistic) by each phase are used as features for the final classification.
CitacióTibaduiza, D. [et al.]. Active piezoelectric system using PCA. A: European Workshop on Structural Health Monitoring. "Structural health monitoring 2010: proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28-July 4, 2010; [EWSHM]". Sorrento: 2010, p. 164-169.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Active piezoelectric system using PCA.pdf | 6,600Mb | Accés restringit |