Rights accessRestricted access - publisher's policy
The paper reports an experimental study and parameter calibration exercise centred on
the hydro-mechanical response of an unsaturated soil. The study benefits from compacted silt samples retrieved from a fully instrumented experimental embankment, which was built under poorly compacted
conditions to study the collapse response upon artificial flooding. In addition to the hydraulic characterisation, the experimental programme includes controlled-suction tests intended to follow similar wetting
and drying paths to those undergone by the material under real conditions. The suction dependent elastoplastic BBM model is used to simulate selected experimental results related to the collapsible behaviour
(its time evolution and its response with decreasing suction). Mechanical and hydraulic parameters of the model are determined by both direct experimental procedures and numerical back analysis.
CitationGómez, R. [et al.]. Parameter calibration for hydro-mechanical modelling using numerical simulations of test results. A: International Conference on Unsaturated Soils. "Fifth International Conference on Unsaturated Soils". Barcelona: Taylor & Francis, 2010, p. 823-828.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org