Preliminary OBSEA mooring design
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/11366
Tipus de documentArticle
Data publicació2010-12-01
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The Obsea Cabled Observatory (www.obsea.es) is going
to be expanded with new sea surface sensors such a meteorological
station and a video camera. These new sensors are
going to be installed in a surface buoy with wireless communication
to the Obsea Data Center at SARTI’s Laboratories. The
mooring design and simulations are presented in this paper,
taken into account the marine conditions of the area located in
the Vilanova I la Geltrú coast in the Metiterranean Sea. The simulations
of the static and dynamic behaviour of the anchored
buoy were done with the software OrcaFlex 9.4.
CitacióArbos, A.; Nogueras, M.; Del Rio, J. Preliminary OBSEA mooring design. "Instrumentation viewpoint", 01 Desembre 2010, núm. 10, p. 6-7.
ISSN1697-2562
Versió de l'editorhttp://sites2.upc.edu/~www-sarti/web/cat/recerca/publi_butlletins.php
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
PRELIMINARY OBSEA MOORING DESIGN 6-7.pdf | article text complet en format pdf | 1,110Mb | Visualitza/Obre |