Tunable substrate integrated waveguide resonators
Visualitza/Obre
Cita com:
hdl:2117/112832
Tipus de documentArticle
Data publicació2012-09-01
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper presents a novel approach for providing SIW tunable resonators by means of placing an additional metalized via-hole on the waveguide cavity. The via-hole contains an open-loop slot on the top metallic wall. The dimensions, position and orientation of the open-loop slot defines the tuning range. Fabrication of some designs reveal good agreement between simulation and measurements. Additionally a preliminary prototype which sets the open-loop slot orientation manually is also presented, achieving the expected continuous tuning range of at least 8%.
Descripció
Canvi de títol a la versió final publicada per l'editor: "Mechanical tuning of substrate integrated waveguide resonators".
©2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
CitacióMira, F., Mateu, J., Collado, J. Tunable substrate integrated waveguide resonators. "IEEE microwave and wireless components letters", 1 Setembre 2012, vol. 22, núm. 9, p. 447-449.
ISSN1531-1309
Versió de l'editorhttp://ieeexplore.ieee.org/document/6256760/
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
tuning_SIW_final_9_drac.pdf | 329,2Kb | Visualitza/Obre |