Mostra el registre d'ítem simple
Power line impedance characterization of automotive loads at the power line communication frequency range
dc.contributor.author | Aragon Homar, Marc |
dc.contributor.author | Salinas, Mauricio |
dc.contributor.author | Riu Costa, Pere Joan |
dc.contributor.author | Silva Martínez, Fernando |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica |
dc.date.accessioned | 2011-02-02T10:06:11Z |
dc.date.available | 2011-02-02T10:06:11Z |
dc.date.created | 2010 |
dc.date.issued | 2010 |
dc.identifier.citation | Aragon, M. [et al.]. Power line impedance characterization of automotive loads at the power line communication frequency range. A: International Symposium on Electromagnetic Compatibility (EMC Europe). "EMC Europe 2010 9th International Symposium on EMC joint with 20th International Wroclaw Symposium on EMC". Wroclaw: 2010, p. 273-277. |
dc.identifier.isbn | 978-83-7493-426-8 |
dc.identifier.uri | http://hdl.handle.net/2117/11255 |
dc.description.abstract | A complete system able to measure complex impedance, both in magnitude and phase, of an automotive electrical load is designed. The development of such system emerged from the need of measure the impedance of these loads in a wide range of frequencies (100 kHz to 30 MHz) while being connected to power supply and in operation. This powered up condition introduces several problems when the impedance is measured by means of traditional instruments such as Vector Network Analyzers (VNA), which could be damaged by transients. Understanding the behaviour of electrical cars loads in the frequency domain is of primary importance not only for in-vehicle Power Line Communication (PLC) channels response, but also to understand electromagnetic emissions (EMI)problems related with this type of communications. |
dc.format.extent | 5 p. |
dc.language.iso | eng |
dc.subject | Àrees temàtiques de la UPC::Enginyeria electrònica::Instrumentació i mesura::Compatibilitat electromagnètica |
dc.subject.lcsh | Electromagnetic compatibility |
dc.subject.lcsh | Power line communication |
dc.subject.lcsh | Impedance measurements |
dc.subject.lcsh | Automotive systems |
dc.title | Power line impedance characterization of automotive loads at the power line communication frequency range |
dc.type | Conference report |
dc.subject.lemac | Compatibilitat electromagnètica |
dc.subject.lemac | Impedància (Electricitat) -- Aplicacions |
dc.contributor.group | Universitat Politècnica de Catalunya. IEB - Instrumentació Electrònica i Biomèdica |
dc.identifier.dl | © Wroclaw University of Technology |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.identifier.drac | 4474325 |
dc.description.version | Postprint (published version) |
local.citation.author | Aragon, M.; Salinas, M.; Riu, P.; Silva, F. |
local.citation.contributor | International Symposium on Electromagnetic Compatibility (EMC Europe) |
local.citation.pubplace | Wroclaw |
local.citation.publicationName | EMC Europe 2010 9th International Symposium on EMC joint with 20th International Wroclaw Symposium on EMC |
local.citation.startingPage | 273 |
local.citation.endingPage | 277 |