Development of a multimaterial additive manufacturing process for electronic devices
Visualitza/Obre
10.1016/j.promfg.2017.09.180
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/111320
Tipus de documentArticle
Data publicació2017-10-06
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a two-dimensional Drop-on-Demand Inkjet printing system.
Through DLP technology based on digital micromirror devices (DMDs) it is possible to build up 3D geometries layer-by-layer using polymerization of photosensitive resins. Concurrently, while the construction process is performed, the InkJet printing system is used to deposit tiny drops of conductive inks on the substrate generated, which will thus constitute an electric circuit embedded within the three dimensional structure.
On the other hand, photosensitive resins have been filled with Low Temperature Co-firing Ceramic (LTCC) particles, in order to modify the basis properties of the part by using sinterizable slurries. Finally the challenges in the sintering process for achieving functional parts are discussed and a few prototypes have been built in order to validate this technology.
CitacióMuguruza, A., Bonada, J., Gómez, A., Minguella-Canela, J., Fernándes, J., Ramos, F., Xuriguera, E., Varea Espelt, A., Cirera , A. Development of a multimaterial additive manufacturing process for electronic devices. "Procedia manufacturing", 6 Octubre 2017, vol. 13, p. 746-753.
ISSN2351-9789
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S2351978917308181
Col·leccions
- Departament d'Enginyeria mecànica - Articles de revista [594]
- Departament de Resistència de Materials i Estructures a l'Enginyeria - Articles de revista [510]
- REMM - Recerca en Estructures i Mecànica de Materials - Articles de revista [107]
- TECNOFAB - Grup de Recerca en Tecnologies de Fabricació - Articles de revista [204]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1-s2.0-S2351978917308181-main.pdf | 1,351Mb | Visualitza/Obre |