Development and validation of an automated test bench for electronic products
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/109285
Tipus de documentProjecte Final de Màster Oficial
Data2017-07-20
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This master’s thesis shows the development of a test bench for a flow sensor devices calibration. The project
development will be carried out at a company, between February 2017 and July 2017. Therefore, during the project
time, the test bench will be designed, developed and tested. The purpose of the test bench is the calibration for one
of the products that the company is currently developing. For the product calibration, it is necessary air flowing
into. For the current test bench, the calibration needs an operator to control air flow by using manual valves.
However, the calibration process is long and if the operator is not on site, the calibration process may fail. So the
new test bench will include three modes of operation, which will be explained for the next chapters.
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TFM_Daniel_Rodriguez.pdf | 28,85Mb | Visualitza/Obre |