Rights accessRestricted access - publisher's policy
The goal of this work is to analyse the influence of hydrothermal degradation on wear behaviour on samples of tetragonal polycrystals doped with 3% molar of yttria in air under dry sliding conditions on samples artificially aged at 0, 10 and 60 hours in autoclave at 131°C. The samples were prepared by conventional compaction and sintering at 1450°C. The study was carried out by performing scratch tests and ball on disc experiments against 3Y-TZP balls. At low
loads the damage was not distinctive, but under high loads the damage mechanisms were different suggesting a clear effect of degradation after long ageing times. On the contrary, in samples degraded during 60 hours the wear rates in both experiments were initially higher than on non-aged specimens and decreased with increasing load and/or sliding distance.
CitationChitapalli, R. [et al.]. Influence of hydrothermal degradation on wear behaviour of Zirconia tetragonal polycrystals doped with 3% molar of yttria. A: Encuentro del Grupo Español de Fractura. "XXVI Encuentro del Grupo Español de Fractura". Santander: 2009, p. 86-91.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: firstname.lastname@example.org