Thermomechanical analysis of an electrically assisted wire drawing process
Visualitza/Obre
Thermomechanical Analysis of an Electrically-Assisted Wire Drawing Process (1,378Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/109166
Tipus de documentArticle
Data publicació2017-09-18
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Electrically-assisted wire drawing process is a hybrid manufacturing process characterized by enhancement of the formability, ductility and elongation of the wire drawn specimen. A thermomechanical model to describe the change of the mechanical response due to the thermal contribution is proposed in this work. Additionally, a numerical simulation was conducted to study the potential and limitations of this hybrid process by using two different hardening laws: a phenomenological and a dislocationbased hardening laws. The results show how the flow stress, the effective plastic strain and residual stresses behave under the electroplusing effect. In addition, Electron Backscattered Diffraction was used to study the electropulsing treatments on the
microstructure during cold drawing. It is observed a decrease of the high and low angle grain boundaries for samples deformed with electropulsing. This detwinning process has a strong influence on the strain hardening by improving the material formability. It was shown that the two proposed hardening laws adequately describe the electrically-assisted wire drawing process showing a similar mechanical behavior. Nevertheless, the dislocation-based hardening law has the
potential to be generalized to many other material and process configurations without extensive number of material tests as the phenomenological hardening law would require.
CitacióSanchez Egea, Antonio J., Gonzalez-Rojas, Hernan A., Celentano, D., Jorba, J., Cao, J. Thermomechanical analysis of an electrically assisted wire drawing process. "Journal of manufacturing science and engineering. Transactions of the ASME", 18 Setembre 2017, vol. 139, núm. 11, p. 111017-111017-7.
ISSN1087-1357
Col·leccions
- Departament d'Enginyeria mecànica - Articles de revista [596]
- Departament de Ciència dels Materials i Enginyeria Metal·lúrgica - Articles de revista [960]
- PROCOMAME - Processos de Conformació de Materials Metàl·lics - Articles de revista [259]
- TECNOFAB - Grup de Recerca en Tecnologies de Fabricació - Articles de revista [206]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Thermomechancial analysis_Accepted-edition.pdf | Thermomechanical Analysis of an Electrically-Assisted Wire Drawing Process | 1,378Mb | Accés restringit |