Fatigue lifespan study of PLA parts obtained by additive manufacturing
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/108146
Tipus de documentComunicació de congrés
Data publicació2017
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Currently, additive manufacturing (AM) is not limited to prototype manufacturing, but is also used to generate parts with final applications. This paper considers this aspect of 3D printing, and aims to characterize fatigue life of parts manufacturied through fused filament fabrication. This is one of the most complex AM technologies, due to the high number of parameters that must be taken into account. The knowledge of the influence of the different manufacturing parameters on the mechanical behavior of the parts has been previously considered for static forces, but so far, dynamic working regimes have not been explored. In this paper, a design of experiments through Taguchi orthogonal arrays is applied to analyze the influence of five factors on fatigue life on PLA specimens. Five fatigue tests are performed for each combination of parameters. Results show that fill density, nozzle diameter and layer height are the most influential factors on fatigue lifespan. Finally, honeycomb proves to be the most beneficial infill pattern with regards to fatigue life.
CitacióJerez-Mesa, R., Travieso-Rodríguez, J.A., Lluma, J., Gomez, G., Puig, D. Fatigue lifespan study of PLA parts obtained by additive manufacturing. A: Manufacturing Engineering Society International Conference. "Proceedings of the 7th Manufacturing Engineering Society International Conference: Vigo (Spain), June 2017". Vigo: 2017, p. 230.
ISBN2351-9789
Col·leccions
- Departament d'Enginyeria mecànica - Ponències/Comunicacions de congressos [481]
- TECNOFAB - Grup de Recerca en Tecnologies de Fabricació - Ponències/Comunicacions de congressos [78]
- Departament de Ciència dels Materials i Enginyeria Metal·lúrgica - Ponències/Comunicacions de congressos [283]
- PROCOMAME - Processos de Conformació de Materials Metàl·lics - Ponències/Comunicacions de congressos [80]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
MESIC 2017 PLA fatigue_version final.pdf | 363,6Kb | Visualitza/Obre |