Parametric analysis of active flow control using steady suction and steady blowing
Visualitza/Obre
Article (288,1Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/107917
Tipus de documentText en actes de congrés
Data publicació2017
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Active Flow Control is implemented over NACA 2412 airfoil using Steady Suctionand Steady Blowing techniques. The pre-stall angle of attack (AOA) 12 0 is studied at a high Reynolds number (Re chord ) of 3.1*10 6 for two-dimensional, incompressible and steady flow conditions. A wide range of parametric value set is considered for Slot location (l s ), Velocity magnitude ratio (U j /U 0 ), slot width (w) and angle of perturbation (ß) using both steady suction and steady blowing independently. The numerical modeling is done using the corresponding solver in OpenFOAM, an open source CFD framework. The turbulence modeling is done using Reynolds Averaged Navier Stokes (RANS) equations, specifically k-k l -¿ model implementation in OpenFOAM. The impact of the parametric set on aerodynamic coefficients, lift (C l ) and drag( C d ), and flow separation is illustrated. Along with, the relevant boundary layer physics are explained.
CitacióPrakash, B., Mellibovsky, F., Bergadà, J.M. Parametric analysis of active flow control using steady suction and steady blowing. A: International Conference on Computational and Mathematical Methods in Science and Engineering. "Proceedings of the 17th International Conference on Computational and Mathematical Methods in Science and Engineering, CMMSE 2017, Costa Ballena (Rota), Cádiz, Spain, July 4-8, 2017". Rota, Cádiz: 2017, p. 1712-1721.
ISBN978-84-617-8694-7
Col·leccions
- Departament de Mecànica de Fluids - Ponències/Comunicacions de congressos [195]
- Departament de Física - Ponències/Comunicacions de congressos [673]
- DF - Dinàmica No Lineal de Fluids - Ponències/Comunicacions de congressos [107]
- TUAREG - Turbulence and Aerodynamics in Mechanical and Aerospace Engineering Research Group - Ponències/Comunicacions de congressos [74]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
BHANU_cmmse_2017.pdf | Article | 288,1Kb | Accés restringit |