Effect of the recycling and annealing on the mechanical and fracture properties of poly(lactic acid)
Visualitza/Obre
Article principal (780,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/10767
Tipus de documentArticle
Data publicació2010-12
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The aim of this work is to evaluate the use of Poly(lactic acid)(PLA) industrial waste as a source of raw material for certain applications, as well to understand the effects of the annealing on the fracture behaviour of PLA. PLA waste has been simulate by an initial step of extrusion in a single screw extruder and pelletizing. Specimens of virgin and reprocessed PLA were obtained by injection molding. An anneling treatment capable of increasing the percentage of cristallinity (determined by differential scanning calorimetry) was also analyzed in reprocessed and non reprocessed specimens. The fracture behaviour was studied at slow and high testing speed, applying the linear elastic fracture mechanics (LEFM) on single edge notched bend (SENB) specimens. This study revealed that the fracture toughness of the reprocessed PLA was basically the same that the virgin PLA and also that the increase in the crystalline fraction produced an improvement on the fracture toughness, at slow loagind rate.
CitacióNascimento, L. [et al.]. Effect of the recycling and annealing on the mechanical and fracture properties of poly(lactic acid). "Journal of polymers and the environment", Desembre 2010, vol. 18, núm. 4, p. 654-660.
ISSN1566-2543
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Effectontherecycling.pdf | Article principal | 780,8Kb | Accés restringit |