Passivhaus design in a Spanish climate
Visualitza/Obre
Memòria (2,687Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/107184
Realitzat a/ambHochschule Ostwestfalen-Lippe
Tipus de documentTreball Final de Grau
Data2016-09
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The objective of this research is to adapt the Standard Passivhaus to the Spanish climate, specifically from Barcelona, using the PHPP tool. So, it starts modeling a very simple Building typical from Spain, using the same construction solutions. Then, introducing the values and check the results from the German software and making the necessary improvements to reach the values from the Standard Passivhaus regulations. Once it reaches the values, the next step was to try reaching the 0 energy demand modifying again and again the Building properties. In the research you will see then three different versions of the same Building: the first one with any improvements, the second one with few improvements just to reach the minimum values required and the third one with all the possible improvements.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
THESIS FINAL VERSION.pdf | Memòria | 2,687Mb | Accés restringit |