Case study of a large lattice truss timber structure of an industrial building
Visualitza/Obre
4465609.pdf (893,5Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/10691
Tipus de documentText en actes de congrés
Data publicació2010
EditorCRC Press. Taylor & Francies Group
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The study of the actual state and the strengthening intervention developed on a
large industrial timber building erected in 1921 in Cardona (close to Barcelona) is presented. The external dimensions of the building are 85.0 m long, 37.7 m wide and 32.42 m high. Some main frames had presented historical failures, without falling down, in the tie member of the roof just under its top. Structural analysis showed very high stresses at that point that explained
such failures. A minimal and low cost intervention was designed to resist excess bending stresses by enlarging timber section where it was possible. Close to connections, where enlarging cross section of the members was no possible, it was decided to use stainless steel ties.
CitacióMolins, C. Case study of a large lattice truss timber structure of an industrial building. A: International Conference on Structures and Architecture. "First International Conference on Structures and Architecture". Guimarães: CRC Press. Taylor & Francies Group, 2010, p. 1058-1065.
ISBN978-0-415-49249-2
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
4465609.pdf | 893,5Kb | Accés restringit |