A virtual reconstruction of a wave-powered flour mill from 1801
Visualitza/Obre
ARTICLE PRINCIPAL (1,226Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/104956
Tipus de documentCapítol de llibre
Data publicació2011-04-06
EditorSpringer
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Around 1801, Francisco Terrés i Serra designed and developed a sustainable wave-powered flour mill in Vilanova i la Geltrú, a town located on the Mediterranean coast south of Barcelona, Spain. The mill, which was located on the seashore, consisted of a system of paddles driven by waves that provided the energy necessary to pump sea water to a gathering pond located at a height of 5 m above sea level. This water was then fed to a wooden waterwheel that, via a lantern wheel, turned two sets of millstones in the upper room of the mill where the flour was ground.
The mill is now located more than 50 m from the water line due to the sedimentation of the coastline caused by the construction of nearby breakwater walls. Only a small part of the building is still standing, however, and there are no traces of the original hydropower or pumping systems.
Using information gathered by the historian Francisco Conde and original plans of the mill obtained from the Navy Command in Barcelona, we created a virtual reconstruction of the flour mill complex and its hydraulic components and a 3D simulation of how the mill operated.
CitacióLopez, M., Villasevil, F.X., Lopez, D., Monguet, J.M., Marques, J. A virtual reconstruction of a awave-powered flour mill from 1801. A: "History of machines for heritage and engineering development". Springer, 2011, p. 119-138.
ISBN978-94-007-1250-8
Versió de l'editorhttps://link.springer.com/book/10.1007/978-94-007-1251-5
Col·leccions
- Departament d’Enginyeria Gràfica i de Disseny - Capítols de llibre [56]
- INSIDE - Innovació en Sistemes per al Disseny i la Formació a l'Enginyeria - Capítols de llibre [13]
- LAM - Laboratori d'Aplicacions Multimèdia i TIC - Capítols de llibre [4]
- Departament d'Expressió Gràfica a l'Enginyeria (fins maig 2020) - Capítols de llibre [15]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Capitulo Libro Springer_2009_ingles.pdf | ARTICLE PRINCIPAL | 1,226Mb | Accés restringit |