Design and characterization of a magnetic digital flow regulator
Visualitza/Obre
DESIGN AND CHARACTERIZATION.pdf (1,073Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/10325
Tipus de documentArticle
Data publicació2010-07-01
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Design, fabrication and testing of a novel micromachined “quasi-digital” microflow regulator for integrated microfluidic systems. Operation relies on the use of a permanent magnet which interacts with
an electrodeposited layer of Co–Ni on an array of V-shaped cantilever beams under a constant pressure.
Each valve actuates as an on–off fluidic switch, opening or closing its corresponding microchannel. The flow can be adjusted to a set of different values (digital) by changing the position of the magnet. The
microflow regulator has been designed, fabricated and experimentally tested showing a flow variation of 211% at a pressure of 160 mbar.
CitacióCasals, J. [et al.]. Design and characterization of a magnetic digital flow regulator. "Sensors and actuators A. Physical", 01 Juliol 2010, vol. 162, núm. 1, p. 107-115.
ISSN0924-4247
Versió de l'editorhttp://linkinghub.elsevier.com/retrieve/pii/S0924424710002013
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
DESIGN AND CHARACTERIZATION.pdf | 1,073Mb | Accés restringit |