Micro-mechanical modeling of masonry: parametric study
Visualitza/Obre
Paper presented to the SAHC 2016 conference (178,4Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/101980
Tipus de documentText en actes de congrés
Data publicació2016
EditorCRC Press
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Masonry structures, usually being composed of a repeating geometric pattern, lend themselves well to analysis using periodic unit cells. Based on stress and strain equilibriums and rational assumptions concerning the interaction of the components of the cell, one may propose micro-mechanical models using simple analytical expressions which simulate well the behavior of masonry. Models describing the nonlinear behavior of masonry constituent materials may be implemented in such models and used to simulate the failure modes anticipated to arise in the composite. In this way, the nonlinear behavior of masonry composites may be derived, as defined by the interaction of its two main material phas-es: units and mortar. Taking advantage of the low computational cost of models based on analytical expres-sions, which is only a fraction of those based on finite element simulations, wide and in-depth parametric analyses can be performed with ease. In this paper, a model for the nonlinear behavior of masonry is presented and used in a parametric study, investigating the influence of various material properties on its compressive strength. The results indicate a strong dependence of the compressive strength of masonry on material parameters that are difficult to measure accurately or are often ignored, particularly in existing and historic masonry structures.
CitacióRoca, P., Molins, C., Drougkas, A. Micro-mechanical modeling of masonry: parametric study. A: International Conference on Structural Analysis of Historical Constructions. "Structural Analysis of Historical Constructions: Anamnesis, Diagnosis, Therapy, Controls: proceedings of the 10th International Conference on Structural Analysis of Historical Constructions (SAHC, Leuven, Belgium, 13-15 September 2016)". Leuven: CRC Press, 2016, p. 279-283.
ISBN978-1-138-02951-4
Versió de l'editorhttp://www.crcnetbase.com/doi/abs/10.1201/9781315616995-41
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
SAHC16 paper Roca Molins Drougkas.pdf | Paper presented to the SAHC 2016 conference | 178,4Kb | Accés restringit |