PublisherIEEE Press. Institute of Electrical and Electronics Engineers
Rights accessOpen Access
An increased requirement for validation of
computational electromagnetic simulation and modelling through the publication of IEEE Standard 1597.1 brings to light some interesting issues surrounding the validation of transients.
The structure of a transient event has three particular regions of interest that can have an influence on the results, of which only
two are generally well defined. These are the initial quiescent phase from t = 0 to the transient event; the transient event itself up to the point where the energy has fallen to a predefined limit, and the post-transient phase where residual energy is still present in the system. This latter region is generally ill-defined and changes the way that a validation comparison should be made, from, for example a frequency domain coupling study where the region of interest is usually well defined. This study
looks at the influence of the three regions on the validation results and suggests how the Feature Selective Validation (FSV)
method can be applied in transient studies.
CitationJauregui, R. [et al.]. Factors influencing the successful validation of transient phenomenon modelling. A: Asia-Pacific International Symposium on Electromagnetic Compatibility. "The 2010 Asia-Pacific Electromagnetic Compatibility Symposium and Technical Exhibition". Beijing: IEEE Press. Institute of Electrical and Electronics Engineers, 2010, p. 338-341.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com