Mostra el registre d'ítem simple
Comparison of different optimization and process control procedures
dc.contributor.author | Reibenschuh, Marko |
dc.contributor.author | Cus, Franc |
dc.contributor.author | Zuperl, Uros |
dc.date.accessioned | 2010-11-10T18:32:31Z |
dc.date.available | 2010-11-10T18:32:31Z |
dc.date.issued | 2010-10 |
dc.identifier.citation | Reibenschuh, Marko; Cus, Franc; Zuperl, Uros. Comparison of different optimization and process control procedures. "Journal of Industrial Engineering and Management", Octubre 2010, vol. 3, núm. 2, p. 383-398. |
dc.identifier.issn | 2013-0953 |
dc.identifier.uri | http://hdl.handle.net/2099/9409 |
dc.description.abstract | This paper includes a comparison of different optimization methods, used for optimizing the cutting conditions during milling. It includes also a part of using soft computer techniques in process control procedures. Milling is a cutting procedure dependent of a number of variables. These variables are dependent from each other in consequence, if we change one variable, the others change too. PSO and GA algorithm are applied to the CNC milling program to improve cutting conditions, improve end finishing, reduce tool wear and reduce the stress on the tool, the machine and the machined part. At the end a summary will be given of pasted and future researches. |
dc.format.extent | 16 p. |
dc.language.iso | eng |
dc.publisher | School of Industrial and Aeronautic Engineering of Terrassa (ETSEIAT). Universitat Politècnica de Catalunya (UPC) |
dc.rights | Attribution-NonCommercial 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria mecànica::Processos de fabricació mecànica |
dc.subject | Àrees temàtiques de la UPC::Economia i organització d'empreses::Direcció d'operacions::Control estadístic de processos |
dc.subject.lcsh | Process control |
dc.subject.lcsh | Milling machinery |
dc.subject.lcsh | Cutting |
dc.subject.other | Optimization |
dc.subject.other | Milling |
dc.subject.other | Cutting parameters |
dc.subject.other | LENS |
dc.title | Comparison of different optimization and process control procedures |
dc.type | Article |
dc.subject.lemac | Control de processos |
dc.subject.lemac | Fresat |
dc.subject.lemac | Optimització industrial |
dc.identifier.dl | B-28744-2008 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.citation.author | Reibenschuh, Marko; Cus, Franc; Zuperl, Uros |
local.citation.publicationName | Journal of Industrial Engineering and Management |
local.citation.volume | 3 |
local.citation.number | 2 |
local.citation.startingPage | 383 |
local.citation.endingPage | 398 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
2010, vol. 3, núm. 2 [11]
Special Issue - Management of Technologies: Step to Sustainable Production