Aplicación del protocolo OGC Puck para instrumentación lug and playRS232 y TCPIP
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099/12992
Tipus de documentArticle
Data publicació2012
EditorSARTI Technological Development Centre of Remote Acquisition and Data processing Systems
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In the small market of precision measuring instruments there is no standardization
of the communication protocols used for control and instrument
configuration. Each manufacturer defines their own syntax and set
of commands for each instrument. Due to this particular problem it is
necessary to create a communication protocol that uses a common syntax
and a set of common commands in addition to the specific commands
of these instruments. Such protocol is the OGC ® PUCK Protocol Standard
that can be implemented in any measuring instrument or apparatus. This
new protocol works through RS232 serial communication, most common
for measuring instruments, but also for Ethernet communication (TCP-IP).
CitacióVieiraSilva, Luis; Río Fernandez, Joaquín del. Aplicación del protocolo OGC Puck para instrumentación lug and playRS232 y TCPIP. "Instrumentation viewpoint", 2012, vol. Winter, núm. 13, p. 30-32.
ISSN1886-4864
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Protocolo_OGC_Puck.pdf | 2,132Mb | Visualitza/Obre |