Enviaments recents

  • Pyramic array: An FPGA based platform for many-channel audio acquisition 

    Azcarreta Ortiz, Juan (Universitat Politècnica de Catalunya, 2016-08-24)
    Projecte Final de Màster Oficial
    Accés obert
    Realitzat a/amb: École Polytechnique Fédérale de Lausanne
    Microphone arrays techniques present compelling applications for robotic implementations. Those techniques can allow robots to listen to their environment and infer clues from it. Such features might enable capabilities ...
  • Three-axes attitude determination and control system based on magnetorquers for small satellites 

    Vidal Mateu, David (Universitat Politècnica de Catalunya, 2016-10)
    Projecte Final de Màster Oficial
    Accés obert
    This projects takes the desing and implementation of an attitude determination and control subsystem for the 3Cat-2 Mission. The system has to be able to correct the different perturbations and point the satellite to the ...
  • 3D bunch-by-bunch feedback system at ANKA to increase storable beam current 

    Egidos Plaja, Núria (Universitat Politècnica de Catalunya, 2016-09-21)
    Projecte Final de Màster Oficial
    Accés obert
    Realitzat a/amb: Karlsruher Institut für Technologie
    In the ANKA storage ring, a digital state-of-the-art Bunch-By-Bunch (BBB) feedback system provides damping of Coupled-Bunch-Instabilities (CBI) in order to increase the maximum storable beam current and lifetime. Performance ...
  • Very deep convolutional neural networks for face identification 

    Vilardi, Alessandro Luca (Universitat Politècnica de Catalunya, 2016-07)
    Projecte Final de Màster Oficial
    Accés obert
    The goal of this thesis is to evaluate the face identification problem using very deep convolutional neural networks. In recent years, the use of CNN, with a large amount of images in databases, have made the deep learning ...
  • Design of a 16-bit 50-kHz low-power SC delta-sigma modulator for ADC in 0.18um CMOS technology 

    Cisneros Fernández, Jose Agustin (Universitat Politècnica de Catalunya, 2016-07-18)
    Projecte Final de Màster Oficial
    Accés obert
    A general purpose 16 Bits Sigma-Delta modulator ADC for double precision audio 50 kHz bandwidth, targeted for Low-power operation, involving no additional digital circuit compensation, no bootstrapping techniques and ...
  • Diseño de interfaz entre una placa Beaglebone y periféricos mediante el bus GPMC 

    Suárez Vicente, Eugenia (Universitat Politècnica de Catalunya, 2016-05-31)
    Projecte Final de Màster Oficial
    Accés obert
    Desarrallo de una interfaz funcional entre un periférico de memoria externa y una Beaglebone mediante: Diseño hardware, para el elemento periférico y programación del driver GPMC, en el lado de la CPU para activar protocolos ...
  • Design of low-dropout regulator for ultra low power on-chip applications 

    Aymerich Gubern, Joan (Universitat Politècnica de Catalunya, 2016-02-05)
    Projecte Final de Màster Oficial
    36 months embargo
    Low Drop Out (LDO) voltage regulators are commonly used to supply low-voltage digital circuits such as microprocessor cores. These digital circuits normally are continuously changing from one mode of operation to another. ...
  • Inference of thermal models for sensors 

    Novio Vázquez, Santiago (Universitat Politècnica de Catalunya, 2016-05-30)
    Projecte Final de Màster Oficial
    Accés obert
    The presence of thermal diffusivity in a spherical thermal anemometer gives it long-memory dependence. The identification problem and state realisation of this model is addressed by using diffusive representation (DR). In ...
  • Photonic crystals for LED 

    Godizov, Georgy (Universitat Politècnica de Catalunya, 2016-05)
    Projecte Final de Màster Oficial
    Accés restringit per acord de confidencialitat
    The industry of lighting is working hard along the last years to improve the light extraction efficiency of the LEDs. One of the important part of the efficiency study is the software simulation. It allows us to, predict ...
  • Fabricación de estructuras para cristales fotónicos basados en silicio macroporoso 

    Lange Vega, Diego (Universitat Politècnica de Catalunya, 2009-07)
    Projecte Final de Màster Oficial
    Accés restringit per acord de confidencialitat
    Este proyecto tiene como objetivo fabricar estructuras de níquel utilizando silicio macroporoso como molde. La aplicación inicial de estas estructuras es el diseño y fabricación de cristales fotónicos de níquel. Para ...

Mostra'n més