Design a manufacturing process to manufacture a family of shafts
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/4500
Tipus de documentProjecte Final de Màster Oficial
Data2007-06
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In the manufacturing field, normally a product is expected to be beautiful, not so heavy,
small size, easy to move and more important, as much cheap as possible. But how about producing
a mechanical product, a shaft or a gear in a gearbox for example? It is clear that the requirement for
the product will not be like that. In fact, our mechanical product must be high in precision and can
work effectively in harsh environment. Which decides this expectation? The answer is so many,
namely the material, the geometry (or technical design), the working regime, the way the part has
been fabricated….If from a available design, but the part is produced by different process, then
final quality will be very different like, surface roughness, the precision level….So, it is really
important to design a good manufacturing process just to ensure that our mechanical product will
work correctly, effectively and long life time.
ProvinençaAquest document conté originàriament altre material i/o programari no inclòs en aquest lloc web
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Thesis_pfc_Dat.pdf | Report | 3,391Mb | Visualitza/Obre |