Micro-Electro-Opto-Mechanical-Systems or MOEMS have potential applications inter alia in
biomedical research. For instance, studies of the Bystander Effect require controlled
irradiation of biological cells with focused X-rays to reveal the mechanisms occurring.
X-ray focusing may be achieved using an adaptive optic micro-lens in which focusing is
entirely reflective and therefore compatible with broad band illumination, an improvement
over diffractive systems such as zone plates. Such a micro-lens can be microfabricated in
the form of a bent-cantilever beam made from two dissimilar materials (polyimide and gold)
in a thermal bimorph configuration, actuated with a micro heater. The parallel horizontal
slots on the beam provide the transmission and focusing functions, while the heater
provides control of the focal length through variation of the beam’s curvature. This novel
system has been named 1D-MOXI (Micro-Opto-X-ray Imaging) and a basic system has
already been made and tested thermo-mechanically.
The present work focuses on details of the geometry of the deformed slotted micro-beam
lens element under thermally derived strain, using finite element analysis, and suggests an
optimized MOEMS design, giving prescribed curvature of the lens through changing the
number and the dimensions of the slots.
The study reveals the localized stress and the small deviations of the micro-lens behavior
from that of perfect spherical geometry. The focal length variation with temperature is
compared with the experimental values and those predicted by an analytical model.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com