Enviaments recents

  • Creation of a pseudo-pilot working position graphical user interface for an air traffic simulator 

    Hide Alferez, Arol Jon (Universitat Politècnica de Catalunya, 2016-10-31)
    Treball Final de Grau
    Accés obert
    In this report, the development of an interface PWP (Pseudo pilot Working Position), after 3 months internship in the research group ICARUS is documented. The RTS (Real Time Simulations) are one of the bases of research ...
  • Disseny i construcció d'una sonda atmosfèrica 

    Castellà Ayala, David; Fournier Cairó, Yannick (Universitat Politècnica de Catalunya, 2016-11-28)
    Treball Final de Grau
    Accés obert
    The project consists of the construction of a functional meteorological probe, controlled by an Arduino microcontroller. This probe was design to measure pressure and temperature as functions of the altitude. This device ...
  • Comparació entre dades de simulacions numèriques 3D i experimentals en el procès de generació d’un tren gas-líquid en un capil·lar en forma de “T” 

    Hernàndez Monclús, Isaac (Universitat Politècnica de Catalunya, 2016-10-31)
    Treball Final de Grau
    Accés obert
    This document has been a study of the feasibility of a 3D numerical simulation on a two-phase flow in micro-gravity conditions. Specifically, the mixture of air and water in a T-shaped capillary in the absence of gravity. ...
  • Computational fluid dynamics analysis of a lateral mirror and introduction to digital implementation 

    Planes Rodriguez, Nuria (Universitat Politècnica de Catalunya, 2016-07-14)
    Treball Final de Grau
    Accés obert
    Nowadays, lateral mirrors, along with other car components, are in the spotlight of automotive experts, who are trying to modify the geometry of these components so as to reduce the aerodynamic drag and therefore save fuel. ...
  • Creation of new modules in the AirTop simulation environment 

    Figueras Gomez, Daniel (Universitat Politècnica de Catalunya, 2016-09-01)
    Treball Final de Grau
    Accés restringit per acord de confidencialitat
    Realitzat a/amb: Eurocontrol
    This report presents the development process and the final result of a 3 months Traineeship at EUROCONTROL working on the development of a Conflict Resolution tool for integration in a Fast-Time Simulation (FTS) environment. ...
  • Solar UAV for long endurance flights 

    Chamizo Cuní, Llibert (Universitat Politècnica de Catalunya, 2016-06-13)
    Treball Final de Grau
    Accés restringit per decisió de l'autor
    Realitzat a/amb: Vilniaus Gedimino technikos universitetas
    The project have been done during the four months stay in Lithuania by Marc Olmo and LLibert Chamizo. The aim of the project was to obtain an Unmanned Aerial Vehicle powered by solar energy that was able to flight for as ...
  • Automatització d’un canvi electrònic de bicicleta 

    Marquez Abellan, David (Universitat Politècnica de Catalunya, 2016-07-25)
    Treball Final de Grau
    Accés obert
    This report explains the process carried out to use an automatic gear change applied to a bicycle. To do this, a preliminary investigation of the nowadays used systems in this discipline has been done. It is explained the ...
  • Electronic system in a suborbital payload 

    Quintana Buil, Guillem (Universitat Politècnica de Catalunya, 2016-07-22)
    Treball Final de Grau
    Accés obert
    Electronic system and telemetry protocol in a suborbital payload
  • Shape formation algorithm 

    Molina Cortijo, Miguel Angel (Universitat Politècnica de Catalunya, 2016-04-23)
    Treball Final de Grau
    Accés restringit per decisió de l'autor
    Realitzat a/amb: École polytechnique (Montréal)
    This project concerns the implementation of a decentralized algorithm for shape formation. The first idea was to test this algorithm with a swarm of autonomous drones but, due to the lack of time and the complexity of the ...
  • Monte carlo methods for the rectilinear crossing number 

    Zheng, Shutao (Universitat Politècnica de Catalunya, 2016-07-26)
    Treball Final de Grau
    Accés obert
    The thesis is dedicated to find a fast Monte Carlo algorithm for the calculation of the rectilinear crossing number Cr(S) of a point set S in the plane, where Cr(S) is the number of intersections of all the straight ...

Mostra'n més