Estudio del comportamiento hidráulico y mecánico de mezclas granulares con bentonita para barreras de ingeniería
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/17283
Tipus de documentProjecte Final de Màster Oficial
Data2012-12-20
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
[ANGLÈS] This document presents the results obtained by UPC-DIT-GEOLAB on the hydromechanical
behaviour of two different artificially prepared sand/bentonite mixtures used
as Engineered Barrier Systems in two different Projects. One of them is a
Sand/Bentonite mixture (80%/20%, mixed by mass), proposed as filling material in the
Project GMT in situ test (Gas Migration Test in the Grimsel Test Site, Switzerland), for
the study of the water and air migration through the backfill system. This information is
a key issue to interpret the planned gas injection phase of the in situ experiment. In
addition, the tests will be used to derive parameters related to air flow, which enter into
the intended modelling work of the GMT Project.
The other one is a FoCa Clay/Sand/Graphite mixture (60%/35%/5%, mixed by mass),
proposed as filling material in the Project PRACLAY and specifically used in the
“Ophelie” mock-up test, recently dismantled, in which THM characterization was
obtained. This information will be compared with the results obtained in the present
laboratory work. To enhance the understanding of the coupled hydro-mechanical
response of these mixtures, an experimental programme, compatible with a minimum
amount of testing and a reliable determination of material parameters, was performed
within a time schedule of 16 months. The tests were used to derive parameters related to
shear strength and compressibility for load changes at different saturation states. [CASTELLÀ] El siguiente trabajo de investigación presenta los resultados obtenidos por el
UPC_DIT_GEOLAB, para el estudio del comportamiento hidromecánico de dos tipos de
mezclas de suelos compactados, propuestos como material de relleno en un sistema de
almacenamiento profundo de residuos nucleares (Engineered Barrier System). En primer
lugar, se estudian aspectos del comportamiento volumétrico y migración de gas en una mezcla
de arena/bentonita, propuesta como material de relleno en el proyecto europeo GTS (Grimsel
Test Site) y que particularmente, es utilizada en el ensayo a escala real GMT (Gas Migration
Test), para el estudio de los procesos de migración de agua y gas en el sistema de
almacenamiento.
En segundo término, se caracterizó el comportamiento hidromecánico de una mezcla de
arcilla FoCa/arena/grafito, propuesta como material de relleno en el proyecto europeo para el
almacenamiento de residuos nucleares (PRACLAY) en Bélgica. El material se utilizó en un
ensayo a escala real (Ophelie), recientemente desmantelado en el cual se obtuvo información
del comportamiento THM. Estos resultados serán comparados con los obtenidos en el
programa de laboratorio presentado en este trabajo.
MatèriesRadioactive waste sites, Soil mechanics, Clay--Testing, Abocadors de residus radioactius, Mecànica dels sòls, Argila--Proves
TitulacióMÀSTER UNIVERSITARI EN ENGINYERIA DEL TERRENY I ENGINYERIA SÍSMICA (Pla 2009)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Tesina Master (Ivan Garcia) Diciembre 2012.pdf | 5,038Mb | Visualitza/Obre |