Enviaments recents

  • Rod ejection simulation on VVER 1000/320 core using PARCS/TRACE 

    Ruscak, Marek (Universitat Politècnica de Catalunya, 2016-07)
    Projecte Final de Màster Oficial
    Accés obert
    The rod ejection (RE) is a design basis accident in accordance with NUREG-0800 and usually studied using point kinetics. In this thesis a 3D kinetic model is prepared and coupled with a thermal hydraulic system code for ...
  • STIP VI - TARGET 9. RADIATION DAMAGE ASSESSMENT BASED ON A MCNPX SIMULATION 

    Aulet Prieto, David (Universitat Politècnica de Catalunya, 2016-12-12)
    Projecte Final de Màster Oficial
    Accés obert
    The SINQ Target Irradiation Program (STIP) has been developed at Paul Scherrer Institute (PSI) during the last twenty years. It is aimed to analyze the radiation damage induced by spallation reactions in different ...
  • Computational analysis of ion cyclotron resonance frequency heating for DEMO 

    Gallart Escolà, Dani (Universitat Politècnica de Catalunya, 2015-06)
    Projecte Final de Màster Oficial
    Accés obert
    Ion cyclotron resonance frequency heating (ICRH) is one of the most important mechanisms to heat fusion plasma. The magnetic field generated by the magnetic coils forces ions to follow a cyclotron trajectory around the ...
  • Risk Analysis of an interfacing system LOCA in a generic Westinghouse PWR 

    Favre, Jean-Baptiste (Universitat Politècnica de Catalunya / École supérieure d'électricité, 2014)
    Projecte Final de Màster Oficial
    Accés obert
    This project has been developed during my internship in the field of Probabilistic Safety Assessment (PSA) in the offices of Westinghouse. These are in the enclosure of Vandellòs’ Nuclear Plant in Hospitalet de l'Infant. The ...
  • ITER MELCOR model for the assessment of the Cryostat design 

    Labarta Casals, Carolina (Universitat Politècnica de Catalunya, 2014-06)
    Projecte Final de Màster Oficial
    Accés restringit per decisió de l'autor
    ITER cryostat is a cylindrical chamber that will surround the tokamak machine and maintain the vacuum and super-cool operating conditions. The scope of this report is to present the development of an ITER MELCOR model to ...
  • Analysis on the dynamic behavior of corrosion products in the nuclear fuel of a PWR and itsrelationship with the Axial Offset Anomaly (AOA)risk using BOA calculation code 

    Sarria Morales, Marina (Universitat Politècnica de Catalunya, 2013-06)
    Projecte Final de Màster Oficial
    Accés restringit per decisió de l'autor
    This master’s thesis can be characterized as a research project about nuclear engineering. The object of this thesis is the primary system of Vandellós II nuclear power plant. Specifically, it has been focused on the ...
  • Assessment and application of Human Reliability Aanalysis to an Independent Spent Fuel Storage Installation Probabilistic Safety Assessment 

    Díaz Bayona, Pedro (Universitat Politècnica de Catalunya, 2014-02)
    Projecte Final de Màster Oficial
    Accés restringit per decisió de l'autor
    This Master Thesis is framed within a collaboration agreement between the Nuclear Engineering Research Group (NERG) of Universitat Politècnica de Catalunya (UPC) and a Spanish Pressurized Water Reactor (PWR) Nuclear Power ...
  • Analysis of a set of modi cation proposals of Ascó's Nuclear Power Plant Cooling Towers 

    González Escudero, Francisco de Borja (Universitat Politècnica de Catalunya, 2014-02)
    Projecte Final de Màster Oficial
    Accés restringit per decisió de l'autor
    The electrical production of a Nuclear Power Plant depends on the performance of the Circulating Water System, which works removes the residual heat of the plant according to regulations. Owing to the old age of Ascó's ...
  • Steam jet direct condensation in a water suppression pool 

    Aramayo Hernández, Clara Inés (Universitat Politècnica de Catalunya, 2013-07)
    Projecte Final de Màster Oficial
    Accés restringit per decisió de l'autor
    Direct contact condensation (DCC) of a steam jet discharged into a subcooled water pool is an efficient way to condensate a large quantities of water at high pressure and temperature without introducing any complex device. ...
  • Updating and testing of a PWR model for the Modular Accident Analysis Programe MAAP5 

    Marcos Delgado, Elisabet (Universitat Politècnica de Catalunya, 2013-06)
    Projecte Final de Màster Oficial
    Accés obert
    The present Master’s Thesis is part of the Master’s degree in Nuclear Engineering of the Universitat Politècnica de Catalunya and the ENDESA Escuela de Energía, and it was developed during the internship in a Spanish ...

Mostra'n més