Fracture and Fatigue behavior of WC-Ni Cemented Carbides
Visualitza/Obre
Report (1,921Mb) (Accés restringit)
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/15860
Tipus de documentTreball Final de Grau
Data2012-06
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
It is now well-established that cemented carbides exhibit outstanding mechanical properties,
combining the hardness of the ceramic phase with the toughness of the binder phase, as
compared to other materials used for engineering and tooling applications. It has been
extensively documented on the basis of indentation hardness and bending strength tests,
mostly conducted on WC-Co grades. On the other hand, knowledge on the mechanical
properties of cemented carbides with different binder, such as Ni, which are receiving
increased attention, are scarce. In doing so, particular emphasis is placed on assessing
microstructural characteristics, mechanical features such as hardness, transverse rupture
strength, fracture toughness, fatigue limit and fatigue crack growth rate, and the
corresponding fractographic analysis. The use of nickel, in a fine microstructure, appears to
provide results as good as those found for cobalt bound ones in terms of toughness and
fatigue resistance.
TitulacióMOBILITAT INCOMING
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Final Project.pdf | Report | 1,921Mb | Accés restringit |