Articles de revista
http://hdl.handle.net/2117/3765
2024-03-28T15:41:02ZGaudí, geométricamente
http://hdl.handle.net/2117/390651
Gaudí, geométricamente
Alsina Català, Claudi; Gómez Serrano, José
En el 2002 celebramos el 150 aniversario del nacimiento de nuestro arquitecto más universal: Antoni Gaudí Cornet (1852-1926). Nuestro objetivo aquí es mostrar como la visión gaudiniana de la geometría es el resultado de una desbordante creatividad tridimensional basada en una experimentación geométrica sistemática. El presente artículo es una invitación a descubrir la dimensión geométrica presente en la obra de Gaudí y a ver cuáles fueron sus principales ideas geométricas. Gaudí tuvo una visión de la geometría muy personal. Amó profundamente la geometría y, a través de su obra, nos dejó uno de los legados más bellos de formas geométricas hechas realidad.
2023-07-12T07:08:31ZAlsina Català, ClaudiGómez Serrano, JoséEn el 2002 celebramos el 150 aniversario del nacimiento de nuestro arquitecto más universal: Antoni Gaudí Cornet (1852-1926). Nuestro objetivo aquí es mostrar como la visión gaudiniana de la geometría es el resultado de una desbordante creatividad tridimensional basada en una experimentación geométrica sistemática. El presente artículo es una invitación a descubrir la dimensión geométrica presente en la obra de Gaudí y a ver cuáles fueron sus principales ideas geométricas. Gaudí tuvo una visión de la geometría muy personal. Amó profundamente la geometría y, a través de su obra, nos dejó uno de los legados más bellos de formas geométricas hechas realidad.A note on logical connectives with weak duality
http://hdl.handle.net/2117/27998
A note on logical connectives with weak duality
Alsina Català, Claudi; Tomás Belenguer, María Santos
We study the weak duality S(x, N(x)) = N(T (x, N(x))) where S is a continuous t-conorm, T is a continuous t-norm and N is a strong negation. We characterize completely the strict cases and show that in all other cases there is no direct relation between generators of T and S or between their possible Archimedean components in ordinal sums.
The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-319-16235-5_2
2015-05-21T10:18:33ZAlsina Català, ClaudiTomás Belenguer, María SantosWe study the weak duality S(x, N(x)) = N(T (x, N(x))) where S is a continuous t-conorm, T is a continuous t-norm and N is a strong negation. We characterize completely the strict cases and show that in all other cases there is no direct relation between generators of T and S or between their possible Archimedean components in ordinal sums.Estudio para la optimización de mallas estructurales de acero envolventes de edificios en altura según sus solicitaciones, en base al análisis de sus líneas isostáticas
http://hdl.handle.net/2117/26468
Estudio para la optimización de mallas estructurales de acero envolventes de edificios en altura según sus solicitaciones, en base al análisis de sus líneas isostáticas
Señís López, Roger; Sastre Sastre, Ramon; Brufau Niubó, Roberto; Carbajal Navarro, Eusebio Carlos
[CASTELLÀ] El objetivo del presente estudio es determinar si las mallas estructurales de acero, envolventes de edificios en altura (entramado en tubo), son más óptimas y eficientes cuando su diseño se adapta a la trayectoria de las líneas isostáticas de los
elementos estructurales equivalentes bajo las acciones solicitantes. Se analizan 600 modelos de edificios en altura, para
distintas triangulaciones de fachada y esbelteces. Las cargas de viento que influyen sobre los edificios se determinan con el método de Cargas Estáticas Equivalentes de acuerdo a la velocidad del viento y turbulencia provocados por la rugosidad del terreno y la topografía. También será necesario determinar las frecuencias y modos de vibración propios de cada estructura, así como definir los coeficientes de presión, de fuerzas y de momentos resultantes del viento. Los resultados concluyen que las mallas ganan eficiencia cuando identifican la trayectoria de las líneas isostáticas generadas por la acción principal, el viento. [ANGLÈS] The aim of the present study is determinate if the steel space grid envelope structures, for tall buildings (framed tube), are
more optimal and efficient if their design is based on the isostatic lines of their equivalents structural elements according
to their solicitations. In this study, 600 models of tall buildings, for different triangled façades and geometric slenderness, are analyzed. The methodology employed consisted of detecting the wind loads that affects tall buildings applying
the Equivalent Static Wind Loads (ESWL) in relation to the wind speed and turbulence result of the roughness terrain
and the topographic. However, it was also needed to establish the frequencies and modes of vibration of each structure
as well as defining the coefficients of pressure, force and moments produced by the wind. The results conclude that space
grids are more efficient if they do adopt the trajectory of the main and dominant load, in this case the wind.
2015-02-23T13:40:12ZSeñís López, RogerSastre Sastre, RamonBrufau Niubó, RobertoCarbajal Navarro, Eusebio Carlos[CASTELLÀ] El objetivo del presente estudio es determinar si las mallas estructurales de acero, envolventes de edificios en altura (entramado en tubo), son más óptimas y eficientes cuando su diseño se adapta a la trayectoria de las líneas isostáticas de los
elementos estructurales equivalentes bajo las acciones solicitantes. Se analizan 600 modelos de edificios en altura, para
distintas triangulaciones de fachada y esbelteces. Las cargas de viento que influyen sobre los edificios se determinan con el método de Cargas Estáticas Equivalentes de acuerdo a la velocidad del viento y turbulencia provocados por la rugosidad del terreno y la topografía. También será necesario determinar las frecuencias y modos de vibración propios de cada estructura, así como definir los coeficientes de presión, de fuerzas y de momentos resultantes del viento. Los resultados concluyen que las mallas ganan eficiencia cuando identifican la trayectoria de las líneas isostáticas generadas por la acción principal, el viento. [ANGLÈS] The aim of the present study is determinate if the steel space grid envelope structures, for tall buildings (framed tube), are
more optimal and efficient if their design is based on the isostatic lines of their equivalents structural elements according
to their solicitations. In this study, 600 models of tall buildings, for different triangled façades and geometric slenderness, are analyzed. The methodology employed consisted of detecting the wind loads that affects tall buildings applying
the Equivalent Static Wind Loads (ESWL) in relation to the wind speed and turbulence result of the roughness terrain
and the topographic. However, it was also needed to establish the frequencies and modes of vibration of each structure
as well as defining the coefficients of pressure, force and moments produced by the wind. The results conclude that space
grids are more efficient if they do adopt the trajectory of the main and dominant load, in this case the wind.Aproximaciones al análisis de la resistencia al fuego (REI) de un forjado unidireccional
http://hdl.handle.net/2117/23153
Aproximaciones al análisis de la resistencia al fuego (REI) de un forjado unidireccional
Blasco Miguel, Jorge; Maristany Carreras, Jordi; López-Rey Laurens, Javier
La normativa Española es cada vez más exigente
en el control y la prevención de incendios. Especialmente en edificios de cierta altura. En nuestro país,
está ahora vigente la DB-SI del Código Técnico
1
. Ade
-
más, se puede utilizar como referencia alternativa
la correspondiente norma de incendios del Eurocó
-
digo 1
2
. La aplicación de estas normativas al caso
concreto de los forjados, queda en nuestro entorno
un tanto huérfano de apoyatura analítica.
A consecuencia de un encargo ha surgido la nece
-
sidad de determinar la resistencia al fuego de un
edificio aislado representativo de Madrid. Según la
normativa intrínseca de la comunidad, a la hora de
redactar el proyecto, la exigencia mínima para edifi
-
cios de una cierta altura era de 180 minutos. Cifra
un tanto desorbitada que obligaba a extremar el estu
-
dio pedido.
A consecuencia de ello, se ha tenido que construir
un prototipo y realizar un Ensayo real en laboratorio
acompañado de una modelización informática mediante un programa de dinámica de fluidos motivo del
presente informe.
2014-06-04T11:24:58ZBlasco Miguel, JorgeMaristany Carreras, JordiLópez-Rey Laurens, JavierLa normativa Española es cada vez más exigente
en el control y la prevención de incendios. Especialmente en edificios de cierta altura. En nuestro país,
está ahora vigente la DB-SI del Código Técnico
1
. Ade
-
más, se puede utilizar como referencia alternativa
la correspondiente norma de incendios del Eurocó
-
digo 1
2
. La aplicación de estas normativas al caso
concreto de los forjados, queda en nuestro entorno
un tanto huérfano de apoyatura analítica.
A consecuencia de un encargo ha surgido la nece
-
sidad de determinar la resistencia al fuego de un
edificio aislado representativo de Madrid. Según la
normativa intrínseca de la comunidad, a la hora de
redactar el proyecto, la exigencia mínima para edifi
-
cios de una cierta altura era de 180 minutos. Cifra
un tanto desorbitada que obligaba a extremar el estu
-
dio pedido.
A consecuencia de ello, se ha tenido que construir
un prototipo y realizar un Ensayo real en laboratorio
acompañado de una modelización informática mediante un programa de dinámica de fluidos motivo del
presente informe.The use of concrete in Gaudi's Sagrada Familia
http://hdl.handle.net/2117/19881
The use of concrete in Gaudi's Sagrada Familia
Grima López, Rosa; Gómez Serrano, José; Aguado de Cea, Antonio
Despite its unfinished state, the Temple of the Holy Family, or Sagrada Familia, is Antoni Gaudi’s most widely recognized work and one of the most important milestones in the development of Catalan Modernism at the beginning of the twentieth century. This article aims to analyze the role played by concrete in the three different stages of the construction process and to illustrate the uniqueness of the Sagrada Familia. Reinforced concrete started being used in the building’s construction in 1918 to resist the tensions produced in the
pinnacles of the facade. From that moment on, mass concrete, reinforced concrete, and
prefabricated concrete have been used in response to the needs that have arisen. Lately, following in Gaudi’s innovative spirit, the latest advances in building technologies have been introduced in the Sagrada Familia . An example of this innovation is the use of high-strength
concrete since 1998.
2013-07-10T10:38:46ZGrima López, RosaGómez Serrano, JoséAguado de Cea, AntonioDespite its unfinished state, the Temple of the Holy Family, or Sagrada Familia, is Antoni Gaudi’s most widely recognized work and one of the most important milestones in the development of Catalan Modernism at the beginning of the twentieth century. This article aims to analyze the role played by concrete in the three different stages of the construction process and to illustrate the uniqueness of the Sagrada Familia. Reinforced concrete started being used in the building’s construction in 1918 to resist the tensions produced in the
pinnacles of the facade. From that moment on, mass concrete, reinforced concrete, and
prefabricated concrete have been used in response to the needs that have arisen. Lately, following in Gaudi’s innovative spirit, the latest advances in building technologies have been introduced in the Sagrada Familia . An example of this innovation is the use of high-strength
concrete since 1998.La reconstrucción virtual del Obrador de Gaudí
http://hdl.handle.net/2117/19789
La reconstrucción virtual del Obrador de Gaudí
Gómez Serrano, José; Coll Grífol, Jordi; Font Comas, Joan; Àvila Casademont, Genís
La observación del material fotográfico relacionado con el Templo de la Sagrada Familia ha permitido descubrir el taller que Gaudi se había construido a pie de obra y ha despertado un gran interés debido a la modernidad de sus formas. Con la ayuda de una aplicación informática y partiendo de las fotografías y los testimonios históricos, se ha procedido a la reconstrucción virtual de este edificio accesorio, que desconcierta por su capacidad de anticipación a la actualidad
2013-07-04T06:52:00ZGómez Serrano, JoséColl Grífol, JordiFont Comas, JoanÀvila Casademont, GenísLa observación del material fotográfico relacionado con el Templo de la Sagrada Familia ha permitido descubrir el taller que Gaudi se había construido a pie de obra y ha despertado un gran interés debido a la modernidad de sus formas. Con la ayuda de una aplicación informática y partiendo de las fotografías y los testimonios históricos, se ha procedido a la reconstrucción virtual de este edificio accesorio, que desconcierta por su capacidad de anticipación a la actualidadGaudi and reinforced concrete in construction
http://hdl.handle.net/2117/19443
Gaudi and reinforced concrete in construction
Grima López, Rosa; Aguado de Cea, Antonio; Gómez Serrano, José
The first two decades of the 20th century witnessed the introduction and expansion of reinforced concrete as a building material in Spain. Few years passed between the introduction of the first patents in the most industrialized areas of the Iberian Peninsula and the subsequent generalization of the technique through scientific knowledge obtained in universities. This period coincides almost completely with the professional career of Antoni Gaudí, one of the most famous Catalan architects. This study reports that Gaudí had contact with this new material and discusses the transition he made from the traditional construction methods to the use of reinforced concrete in his later works. Placing the starting point in the relationship between Antonio Gaudí and the industrialists who built the first cement factories in Catalonia (especially Eusebi Güell), the research on the patents to which he had access are presented and the characteristics of his works with reinforced structures and materials are described.
2013-05-29T08:40:07ZGrima López, RosaAguado de Cea, AntonioGómez Serrano, JoséThe first two decades of the 20th century witnessed the introduction and expansion of reinforced concrete as a building material in Spain. Few years passed between the introduction of the first patents in the most industrialized areas of the Iberian Peninsula and the subsequent generalization of the technique through scientific knowledge obtained in universities. This period coincides almost completely with the professional career of Antoni Gaudí, one of the most famous Catalan architects. This study reports that Gaudí had contact with this new material and discusses the transition he made from the traditional construction methods to the use of reinforced concrete in his later works. Placing the starting point in the relationship between Antonio Gaudí and the industrialists who built the first cement factories in Catalonia (especially Eusebi Güell), the research on the patents to which he had access are presented and the characteristics of his works with reinforced structures and materials are described.Evolution of the formwork used in the temple of the Sagrada Familia
http://hdl.handle.net/2117/19441
Evolution of the formwork used in the temple of the Sagrada Familia
Gómez Serrano, José; Espel, Ramón; Grima López, Rosa; Burry, Mark Cameron; Aguado de Cea, Antonio
The Sagrada Família is Gaudi's unfinished work, to which he exclusively dedicated his last years of life. Even though he only got to build a small part of the total, he defined the rest through models and photographs. Gaudi's design for the inside of the Temple was based on a new geometric architecture that made extensive use of ruled surfaces (paraboloids, hyperboloids, ellipsoids), opening a new field which later architects have followed. The following article aims at showing the construction complexity of these structures, especially in relation to the set-up of their formwork. The vaults, which cover the naves at 30, 45, and 60 m heights, will be discussed. This discussion will show how the construction method, and in consequence the formwork, is adapted to the construction needs according to the geometric shape, size, position, material, and repetitions of each vault.
2013-05-29T08:29:09ZGómez Serrano, JoséEspel, RamónGrima López, RosaBurry, Mark CameronAguado de Cea, AntonioThe Sagrada Família is Gaudi's unfinished work, to which he exclusively dedicated his last years of life. Even though he only got to build a small part of the total, he defined the rest through models and photographs. Gaudi's design for the inside of the Temple was based on a new geometric architecture that made extensive use of ruled surfaces (paraboloids, hyperboloids, ellipsoids), opening a new field which later architects have followed. The following article aims at showing the construction complexity of these structures, especially in relation to the set-up of their formwork. The vaults, which cover the naves at 30, 45, and 60 m heights, will be discussed. This discussion will show how the construction method, and in consequence the formwork, is adapted to the construction needs according to the geometric shape, size, position, material, and repetitions of each vault.A model for CAGD using fuzzy logic
http://hdl.handle.net/2117/19204
A model for CAGD using fuzzy logic
Jacas Moral, Juan; Monreal Pujadas, Amadeo; Recasens Ferrés, Jorge
This paper presents a first approach to a system based on fuzzy logic for the design of curves and surfaces in the context of computer aided geometric design. Bézier curves and surfaces can be seen as particular cases of this system.
2013-05-14T11:56:35ZJacas Moral, JuanMonreal Pujadas, AmadeoRecasens Ferrés, JorgeThis paper presents a first approach to a system based on fuzzy logic for the design of curves and surfaces in the context of computer aided geometric design. Bézier curves and surfaces can be seen as particular cases of this system.Proyecto y construccion del cierre del ábside de la Sagrada Familia
http://hdl.handle.net/2117/19178
Proyecto y construccion del cierre del ábside de la Sagrada Familia
Buxadé Ribot, Carles; Gómez Serrano, José; Espel, Ramon; Grima López, Rosa; Buxadé, Agata; Ferrando, Ramon; Aguado de Cea, Antonio
2013-05-13T11:08:52ZBuxadé Ribot, CarlesGómez Serrano, JoséEspel, RamonGrima López, RosaBuxadé, AgataFerrando, RamonAguado de Cea, Antonio