Near Field RFID Sensing and Imaging
Visualitza/Obre
Tipus de documentText en actes de congrés
Data publicació2009
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
There is a growing need for designing small self-powered devices, able to sense and deliver
accurate information on the eld distribution around or inside complex media for monitoring and
imaging purposes. Industrial, Scienti c and Medical sensing and imaging applications basically
rely on the measurement of the di racted eld distribution created by an illuminating eld. In
most cases this information is only available at a set of accessible check points, using either an
array of sensors or a moving probe. The requirements of RF or DC cabling sets necessary reduce
the
exibility and increase the cost and complexity of the measurement system. Additionally
some times the points of interest lie in locations that are physically inaccessible, or where wiring
is not possible. In such cases, it is convenient the use of self-powered solution, that do not
require any physical connection to instrumentations in order to retrieve the information, such
as RFID-based elements.
CitacióJofre, L. [et al.]. Near Field RFID Sensing and Imaging. A: International Conference on Electromagnetic Near-Field Characterization and Imaging. "4th". 2009.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ICONIC_2009_Jofre_InvSpeak_NearField_RFID.pdf | Text Complet | 2,970Mb | Visualitza/Obre |