Sequence analysis of polyether-based thermoplastic polyurethane elastomers by 13C NMR
Visualitza/Obre
ma100395x.pdf (705,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/6992
Tipus de documentArticle
Data publicació2010-04-27
EditorAmerican Chemical Society (ACS)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this Note we would like to report on the analysis of the microstructure of segmented polyurethanes by 13CNMRmaking use of the signals arising from nonprotonated aromatic carbons which appear to be sensitive to dyads sequence distribution. The
polyurethanes here studied were obtained from poly(tetramethylene glycol) (PTMG) as macrodiol soft segment, 1,4-butanediol (BD) chain extender, and 4,40'-methylenediphenyl diisocyanate (MDI) as hard segment.The results obtained in this work provide
a relatively simple and reliable method to determine the microstructure of MDI-based thermoplastic polyurethanes by means
of the NMR technique.
CitacióMartinez de Ilarduya, A. [et al.]. Sequence analysis of polyether-based thermoplastic polyurethane elastomers by 13C NMR. "Macromolecules", 27 Abril 2010, vol. 43, núm. 8, p. 3990-3993.
ISSN0024-9297
Versió de l'editorhttp://pubs.acs.org/toc/mamobx/current
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ma100395x.pdf | 705,9Kb | Accés restringit |