Enviaments recents

  • Corrosion effects on hertzian contact fatigue behavior of a WC-Co cemented carbide 

    Fargas Ribas, Gemma; Llanes Pitarch, Luis Miguel (2021)
    Text en actes de congrés
    Accés obert
    The effect of corrosion on the damage induced under cyclic contact loading for a medium-grained WC-6%wtCo hardmetal grade is investigated. Contact fatigue tests are conducted by means of Hertzian indentation techniques. ...
  • Microstructural and micromechanical characterization of Ti-6Al-4V samples produced by laser cladding 

    Roa Rovira, Joan Josep; Leunda, Josu; Mateo García, Antonio Manuel (2020)
    Text en actes de congrés
    Accés obert
    Additive manufacturing of metals is an innovative technology that stimulates much interest. In the particular case of titanium alloys, this technology is nowadays used to produce components, mainly for the aeronautic ...
  • Small-scale assessment of corrosion-induced damage in hardmetals 

    Zheng, Yafeng; Fargas Ribas, Gemma; Besharatloo, Hossein; Roa Rovira, Joan Josep; Lavigne, Olivier; Llanes Pitarch, Luis Miguel (2019)
    Text en actes de congrés
    Accés obert
    In this work, the effect of corrosion-induced damage on the mechanical response of hardmetals was evaluated at small-scale level by means of nanoindentation and nanoscratch. Damage was introduced in a controlled way through ...
  • Promotion of scientific careers: the Aquí STEAM-UPC programme 

    Gómez Castán, Silvia; Ferrer Balas, Dídac; Fenoll, Carme; Garrido Soriano, Núria; Fargas Ribas, Gemma (2019)
    Text en actes de congrés
    Accés obert
  • University-enterprises: a win-win relationship, from business to research 

    Beltran, Ana M; Trueba, Paloma; Salán Ballesteros, Maria Núria; Bayo, Jose M; Rodríguez-Ortiz, Jose A; Torres Hernández, Yadir (2019)
    Comunicació de congrés
    Accés obert
    Teaching at University is always a difficult task because it implies too much theoretical lessons while students ask for practical knowledge and Enterprises claim for good junior professionals. Finding an equilibrium among ...
  • Sustainability and institutionalization model: the case of the MPIA 

    Islas Torres, Claudia; Carranza Alcántar, Maria del Rocío; Salán Ballesteros, Maria Núria; Franco Casillas, Sergio (2019)
    Text en actes de congrés
    Accés obert
    The present text deals in a general way the way in which from the Master in Innovative Processes in Learning (MPIA) that operates as a double degree by the Centro Universitario de Los Altos (CUALTOS) of the University of ...
  • Experiencias de aprendizaje-servicio basado en proyectos en grados de ingeniería en la Universitat Jaume I 

    Cabedo Mas, Luis; Izquierdo, Raul; Royo, Marta; Hernandez, Leonor; Giménez, Isabel; Beltrán San Segundo, Héctor; Moliner, Lidón; Cabedo, Alberto; Roda, Víctor; Lapeña, Leonor; García, Carlos; Peñarrocha, Ignacio; Salán Ballesteros, Maria Núria; Segarra Rubi, Mercè; Puerto, Igor; Guraya, Teresa (Universidad del Pais Vasco, 2017)
    Comunicació de congrés
    Accés obert
    In the present communication, a series of project-based service-learning (PBSL) experiences carried out in the Universitat Jaume I de Castelló will be presented. These experiences have been developed both within undergraduate ...
  • SHE-TIMELINE: to the rescue of the (in)visible pioneers of technology 

    Salán Ballesteros, Maria Núria; Ferrer-Balas, Didac; Gil, Marta; Freire, Ana (2019)
    Text en actes de congrés
    Accés obert
    By reviewing the inauguration data of universities around the world, it is easy to see that access has been very different for men and women. Sometimes, this difference is a few decades but centuries in some cases between ...
  • Microstructural and metallurgical assessment of the laser-patterned cemented tungsten carbide (WC-CoNi) 

    Fang, Shiqi; Soldera, Flavio; Rosenkranz, A.; Herrmann, T.; Bähre, Dirk; Llanes Pitarch, Luis Miguel; Mücklich, Frank T. (2018)
    Text en actes de congrés
    Accés obert
    Cemented carbide is difficult to machine using traditional chip-removal methods due to its hardness. Electrical discharge machining (EDM) is the common method applied to shape cemented carbides because high geometric ...
  • Effect of corrosion-induced damage on microstructure and residual strenght of WC-Co,Ni cemented carbide 

    Zheng, Y.F.; Fargas Ribas, Gemma; Armelín Diggroc, Elaine Aparecida; Llanes Pitarch, Luis Miguel (2018)
    Comunicació de congrés
    Accés obert
  • Influence of the mean carbide size on the micromechanical response of WC-Co hardmetals 

    Sandoval, Daniela A.; Tarrago, J.M.; Rinaldi, Antonio; Notargiacomo, A.; Roa Rovira, Joan Josep; Fair, Jonathan; Llanes Pitarch, Luis Miguel (2017)
    Text en actes de congrés
    Accés restringit per política de l'editorial
  • Micromechanics of Ti(C,N)-FeNi composites: statistical analysis and flow stress determination for the FeNi binder 

    Besharatloo, H.; Roa Rovira, Joan Josep; Dios, M.; Mateo García, Antonio Manuel; Ferrari, M.; Gordo Odériz, Elena; Llanes Pitarch, Luis Miguel (2017)
    Text en actes de congrés
    Accés obert
    The outstanding mechanical and tribological properties exhibited by cemented carbides results from the combination of two phases with different local properties. However, direct assessment of the small-scale response of ...

Mostra'n més