DSpace DSpace UPC
 Català   Castellano   English  

E-prints UPC >
Enginyeria civil >
DEC - Departament d'Enginyeria de la Construcció >
Articles de revista >

Empreu aquest identificador per citar o enllaçar aquest ítem: http://hdl.handle.net/2117/2863

Arxiu Descripció MidaFormat
aguado_molins_materials_1.pdf559,7 kBAdobe PDFThumbnail

Citació: Molins, C.; Aguado, A.; Saludes, S. Double Punch Test to control the energy dissipation in tension of FRC (Barcelona test). Materials and structures, vol. 42, no. 4, p. 415.
Títol: Double Punch Test to control the energy dissipation in tension of FRC (Barcelona test)
Autor: Molins i Borrell, Climent Veure Producció científica UPC; Aguado de Cea, Antonio Veure Producció científica UPC; Saludes Requena, Sergio
Editorial: RILEM
Data: 2007
Tipus de document: Article
Resum: Current testing methods used to measure tensile properties of Fiber Reinforced Concrete(FRC) are mainly based on bending test of beam specimens. They normally show a considerable scatter that makes difficult the quality control, as in particular when such properties are intended to estimate the strength of structural members. In order to improve the material assessment procedure, the Double Punch Test (DPT) has been recovered for the quality control of the tension behaviour of FRC. Former experimental research showed the feasibility of the test and a reduction of the scatter in the values of the tensile strength and of the toughness. This paper describes the results of an experimental program carried out using both DPT and bending test on FRC with different type of fibers, concretes and fiber contents. In addition, a correlation between both tests is proposed. Its application to steel and polyolefin FRC specimens shows very good results.
ISSN: 1359-5997
URI: http://hdl.handle.net/2117/2863
Versió de l'editor: The original publication is available at the publisher’s web site (http://www.springerlink.com/content/k0x3115vp285r861/?p=91debe67144e46289233dc919c3875c3&pi=0). It is copyrighted by RILEM, and readers must contact RILEM for permission to reprint or use the material in any form.
Apareix a les col·leccions:DEC - Departament d'Enginyeria de la Construcció. Articles de revista

Stats Mostra les estadístiques d'aquest ítem

SFX Query

Aquest ítem (excepte textos i imatges no creats per l'autor) està subjecte a una llicència de Creative Commons Llicència Creative Commons
Creative Commons


Valid XHTML 1.0! Programari DSpace Copyright © 2002-2004 MIT and Hewlett-Packard Comentaris
Universitat Politècnica de Catalunya. Servei de Biblioteques, Publicacions i Arxius