Low drop-out voltage regulator as a candidate topology for photovoltaic solar facilities
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/28233
Tipus de documentArticle
Data publicació2015-03
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This article aims to present the design of a 4.5-V, 450-mA low drop-out (LDO) voltage linear regulator based on a two-stage cascoded operational transconductance amplifier (OTA) as error amplifier for photovoltaic solar DC-DC regulation. The aforementioned two-stage OTA is designed with cascoded current mirroring technique to boost up the output impedance. The proposed OTA has a DC gain of 101 dB under no load condition. The designed reference voltage included in the LDO regulator is
provided by a band gap reference with the temperature coefficient (T¿) of 0.025 mV/ºC. The proposed LDO regulator has a maximum drop-out voltage of 0.5 V @ 450 mA of load current, and has the worst case power supply rejection ratio (PSRR) of [54.5 dB, 34.3 dB] @ [100 Hz, 10 kHz] in full load condition. All the proposed circuits are designed using a 0.35 µm CMOS technology. The design is checked in order to corroborate its performance for wide range of input voltage, founding that the circuit design works fine meeting all the initial specification requirements.
CitacióMartinez, H. Low drop-out voltage regulator as a candidate topology for photovoltaic solar facilities. "Renewable Energy and Power Quality Journal", Març 2015, núm. 13, p. 1-6.
ISSN2172-038X
Versió de l'editorhttp://www.icrepq.com/RE&PQJ-papers.html
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ICREPQ-Copyright 350.pdf | Article Definitu | 23,53Kb | Visualitza/Obre |