Current-balancing technique for interleaved voltage source inverters with magnetically coupled legs connected in parallel
Visualitza/Obre
Cita com:
hdl:2117/27088
Tipus de documentArticle
Data publicació2015-03-01
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Connecting legs in parallel in a voltage source inverter is a way to increase the output current and, thus, its rated power. The connection can be made using either coupled or uncoupled inductors, and achieving an even contribution to the output current from all the legs is a crucial issue. Circulating currents produce additional losses and stress to the power devices of the converter. Therefore, they should be controlled and minimized. An efficient technique to attain such balance when coupled inductors are used is presented in this paper. The proposed technique can also be used when the inductors are uncoupled, since it is a particular case where the coupling coefficients are zero. This technique does not include proportional-integral controllers and does not require any parameter tuning either. The exact control action needed to reach current balance is straightforwardly calculated and applied. Experimental results are shown in this paper to verify the efficiency of the proposed balancing method.
Descripció
© 2015 IEEE. Personal use of this material is permitted. Permision from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
CitacióCapella, G. [et al.]. Current-balancing technique for interleaved voltage source inverters with magnetically coupled legs connected in parallel. "IEEE transactions on industrial electronics", 01 Març 2015, vol. 62, núm. 3, p. 1335-1344.
ISSN0278-0046
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
PAPER.pdf | 3,076Mb | Visualitza/Obre |