Degradation and mineralization of Bisphenol A by the photo fenton process
Tipus de documentComunicació de congrés
Data publicació2014
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Bisphenol A (BPA; 2,2-bis (4-hydroxyphenyl) propane) is an industrial organic chemical basically used in
the plastics industry as a monomer for producing epoxy resins and polycarbonates [1,2]. It is also a well-known
endocrine disruptor agent that contaminates surface waters even at low concentration [3].
Unfortunately, BPA cannot be entirely removed from water solutions by conventional treatments.
Additionally, in some cases, such treatments can lead to a series of by-products with higher endocrine disrupting
effect [4].
Advanced Oxidation Processes (AOPs), among them the Fenton and photo-Fenton processes, are efficient
methods for BPA photodegradation [1]. However, they are energy-intensive processes and their cost is ought to
be improved by reducing the reaction time as well as the consumption of reagents.
In this work, the Fenton and the photo-Fenton degradation of BPA (0,5 L, 30 mg L-1) was addressed. The
process efficiency was evaluated under different H2O2 and Fe(II) initial concentrations (2,37-6,41 mM H2O2 and
1,42·10-2-3,92·10-2 mM iron salt), while other variables were fixed (pH=3, 25ºC, UV light source). The
treatment performance was assessed for a series of assays from a factorial design and was quantified in terms of
the decay rate of total organic carbon (TOC) and the total conversion attained, according to a pseudo first order
kinetics [5-6].
The performance of the mineralization may be characterized by determining the two parameters of
the model, ¿max (or [TOC]8) and k, which can be obtained by fitting the model to the experimental data under the
least squares criterion. The results were plot k in front to identify different clusters and the conditions which
produces higher mineralization rates
CitacióNavarro, M.; Graells, M.; Pérez-Moya, M. Degradation and mineralization of Bisphenol A by the photo fenton process. A: Mediterranean Congress of Chemical Engineering. "13th Mediterranean Congress of Chemical Engineering: book of abstracts". Barcelona: 2014, p. 244.
Versió de l'editorhttp://www.ub.edu/congmedit/13MCCEabstracts.pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Navarro_13MCCE.pdf | 112,8Kb | Visualitza/Obre | ||
Navarro_MCCE-2014_posterA4.pdf | 165,0Kb | Visualitza/Obre |