New full connection system for composite slabs: real scale tests
Visualitza/Obre
24_Ferrer_et_al_New full connetion system.pdf (824,9Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/24467
Tipus de documentText en actes de congrés
Data publicació2014
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Currently, most cold-formed steel sheet designs for composite slabs incorporate a repeating pattern of embossments along the entire length of the steel sheet ribs. Their function is to hinder the longitudinal slipping, similarly to the corrugation of the rods in reinforced concrete, so that the longitudinal shear forces are transferred between steel and concrete. However, in composite slabs, the wedge effect of the embossments transforms the relative slipping of the steel sheet and concrete into forces acting on the interface, causing the transversal bending of the sheet, the separation and relative slipping between steel and concrete and, eventually, the complete detachment and the resistance drop.
This paper is presenting the experimental results of a new bonding system, under patent by the Universitat Politècnica de Catalunya (UPC), ensuring the full connection between steel sheet and concrete, applied to composite slabs. The system consists in producing a series of many small crown-shaped breakages on the steel sheet, which are oriented towards the side of the sheet that will remain in contact with the concrete. When fresh concrete is poured, the projections of the mentioned breakages are embedded therein; once the concrete is set, their function is to resist the shearing forces and separating forces generated between both materials when the composite steel-concrete element is loaded.
CitacióFerrer, M.; Marimon, F.; Gámez, R. New full connection system for composite slabs: real scale tests. A: European Conference on Steel and Composite Structures. "EUROSTEEL 2014 - 7th European Conference on Steel and Composite Structures". NÀPOLS: 2014, p. 525-526.
ISBN978-92-9147-121-8
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
24_Ferrer_et_al_New full connetion system.pdf | 824,9Kb | Accés restringit |