pH sensor calibration procedure
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/21849
Tipus de documentComunicació de congrés
Data publicació2013
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper describes the calibration of
pH sensor located at the OBSEA marine Observatory. This instrument is based
on an industrial pH electrode that is connected to a CTD instrument (Conductivity, Temperature,
and Depth
).
The calibration of the pH sensor has been done using a
high precision spectrophotometer
pH
meter
from Institute of Marine
Sciences (ICM), and in this way
it has been
obtained a
numerical
function
for the p
H sensor
proportional to
real
pH.
CitacióArtero, C. [et al.]. pH sensor calibration procedure. A: IMEKO World Congress. "Proceedings 19th IMEKO TC-4, Barcelona, Spain Universitat Politècnica de Catalunya July 18th and 19th, 2013". Barcelona: 2013, p. 739-743.
ISBN978-84-616-5438-3
Versió de l'editorhttp://www.imeko2013.es
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
168 Joana Prat+Antoni+ Carla+Volcans.pdf | 442,4Kb | Visualitza/Obre |