Effect of sandblasting and residual stress on strength of zirconia for restorative dentistry applications
Visualitza/Obre
1-s2.0-S1751616113003056-main.pdf (2,528Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.jmbbm.2013.09.004
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/21777
Tipus de documentArticle
Data publicació2014-01
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Sandblasting is a commonly used surface treatment technique for dental crowns to improve the adhesion of the mating parts of a restoration. The goal of this work is to study the effect of different sandblasting conditions on the mechanical properties of 3 mol% yttria stabilized tetragonal zirconia (3Y-TZP), such as biaxial strength, surface elastic modulus, contact hardness and residual stresses induced by sandblasting. The specimens were sandblasted considering two different particle sizes (110, 250 μm), two pressures (2 and 4 bar) and two impact angles (30° and 90°). Biaxial strength of 3Y-TZP increases when sandblasted with 110 µm particles while its decreases with 250 µm particles for impact angle of 90°. Strength increases slightly when sandblasting with 30° impact angle regardless of the size of the particle. Elastic modulus and contact hardness were not affected by sandblasting with 110 µm particles, and compressive residual stresses are produced down to a depth of ~10 µm.
CitacióChintapalli, R. [et al.]. Effect of sandblasting and residual stress on strength of zirconia for restorative dentistry applications. "Journal of the mechanical behavior of biomedical materials", Gener 2014, vol. 29, núm. SI, p. 126-137.
ISSN1751-6161
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S1751616113003056#
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1-s2.0-S1751616113003056-main.pdf | 2,528Mb | Accés restringit |