Methods for the preparation of doxycycline-loaded phb micro- and nano-spheres
Visualitza/Obre
1-s2.0-S0014305713004205-main.pdf (1,701Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.eurpolymj.2013.08.010
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/20562
Tipus de documentArticle
Data publicació2013-11
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Natural and synthetic biodegradable polymers have been investigated for controlled drug release. Poly(3-hydroxybutyrate) can be produced by bacteria and is remarkable for this application due to its excellent biocompatibility and biodegradability. The objective of this work was to study different drug-entrapment and emulsification methods for the obtaining of doxycycline-loaded PHB micro- and nano-spheres. The micro-/nano-particles were prepared by polymer precipitation via dialysis, simple emulsion (O/W) or multiple emulsion (W1/O/W2) applying solvent evaporation in the last two cases. This was carried out either by ultrasonication, dripping and/or high speed stirring. Different processing conditions were varied in order to evaluate their influence on morphology, size, and drug entrapment capabilities. The highest drug loading was obtained by single emulsion with high speed stirring. In the case of multiple emulsion, the combination of ultrasound with high speed stirring resulted in the most elevate process yield and drug loading capability.
CitacióRodriguez, A. [et al.]. Methods for the preparation of doxycycline-loaded phb micro- and nano-spheres. "European polymer journal", Novembre 2013, vol. 49, núm. 11, p. 3501-3511.
ISSN0014-3057
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0014305713004205
Col·leccions
- TMAS (T+) - Toxicologia i Microbiologia Ambiental i Sanitària - Articles de revista [35]
- Departament de Ciència dels Materials i Enginyeria Metal·lúrgica - Articles de revista [960]
- ENGIBIO - Enginyeria i Biotecnologia - Articles de revista [58]
- Departament d'Òptica i Optometria - Articles de revista [447]
- Departament d'Enginyeria Química - Articles de revista [2.226]
- BBT - Grup de recerca en Biomaterials, Biomecànica i Enginyeria de Teixits - Articles de revista [439]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1-s2.0-S0014305713004205-main.pdf | 1,701Mb | Accés restringit |