Antenas fractales microstrip impresas en esponjas metalizables
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/20039
Tipus de documentText en actes de congrés
Data publicació2009
EditorUnión Científica Internacional de Radio (URSI)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Radiating elements are usually made of metallic materials which increase the antenna complexity and weight. In
order to solve this drawback, an antenna manufacture process using metallized foams is presented. A microstrip patch antenna
inspired in the fractal Koch island geometry embedded in a
rectangular cavity is built and tested. Results of reflection
coefficient and directivity versus frequency have been
compared with simulated data resulting in very good
agreement. All the metallic parts of the antenna (patch, cavity,
and feeding probe) have been metallized on the foam resulting
in a low weight, low complexity, and low cost antenna structure
CitacióAnguera, J. [et al.]. Antenas fractales microstrip impresas en esponjas metalizables. A: Simposium Nacional de la Unión Científica Internacional de Radio. "XXIV Simposium Nacional de la Unión Científica Internacional de Radio: URSI 2009: Palacio de la Magdalena, Santander: 16-18 septiembre 2009". Santander: Unión Científica Internacional de Radio (URSI), 2009.
ISBN978-84-8102-550-7
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ursi2009_jaume_anguera1242554550.pdf | NTENAS FRACTALES MICROSTRIP IMPRESAS EN ESPONJAS METALIZABLES | 1,810Mb | Visualitza/Obre |