Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion
Visualitza/Obre
Lugo-Microstructures.pdf (1,122Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/19691
Tipus de documentArticle
Data publicació2008-02
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Pure Cu of 99.98 wt.% purity has been processed at room temperature by diverse techniques of severe plastic deformation, namely equalchannel angular pressing (ECAP), high pressure torsion (HPT) and a combination of both in order to find out the evolution on the microstructural
homogeneity for each of the processes and their combination. Starting with a grain size of ∼60 m, severe plastic deformation has been introduced to the material while maintaining the sample dimensions unchanged through the processes of ECAP and HPT. A significant decrease in grain size
was observed by transmission electronic microscopy (TEM). Microtensile and microhardness tests were carried out on the deformed material in the three processing conditions. A significant improvement of the tensile strength was promoted with admissible penalization on ductility.
CitacióLugo, N. [et al.]. Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion. "Materials science and engineering A. Structural materials properties microstructure and processing", Febrer 2008, vol. 477, p. 366-371.
ISSN0921-5093
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Lugo-Microstructures.pdf | 1,122Mb | Accés restringit |