Experimental and analytical study of TRM strengthened brickwork walls under eccentric compressive loading
Visualitza/Obre
Experimental and analytical study.pdf (2,965Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.conbuildmat.2013.03.006
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/19675
Tipus de documentArticle
Data publicació2013-07
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The strengthening of load-bearing masonry walls against out-of-plane failure is needed to enhance the life cycle of existing buildings in a sustainable way. In this work, the efficiency of Textile Reinforced Mortar (TRM) for the strengthening of masonry walls is shown by means of an experimental campaign on full scale brick masonry walls. In addition, this campaign has allowed the study of the influence of different mortar and fibre types and the possible benefit of using anchors to improve the connection between the walls and the external reinforcement. The application of TRM has provided an increase of over 100% of the initial load bearing capacity under eccentric axial load. Moreover, a stiffer and more homogeneous behaviour is noticed when TRM is applied. An analytical method to calculate the ultimate axial–bending combination for TRM strengthened brick masonry walls, in agreement with the experiments, is presented.
CitacióBernat, E. [et al.]. Experimental and analytical study of TRM strengthened brickwork walls under eccentric compressive loading. "Construction and building materials", Juliol 2013, vol. 44, p. 35-47.
ISSN0950-0618
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0950061813002079
Col·leccions
- Departament d'Enginyeria de la Construcció (fins octubre 2015) - Articles de revista [211]
- TE - Tecnologia d'Estructures - Articles de revista [111]
- Departament de Resistència de Materials i Estructures a l'Enginyeria - Articles de revista [517]
- LITEM - Laboratori per a la Innovació Tecnològica d'Estructures i Materials - Articles de revista [78]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Experimental and analytical study.pdf | 2,965Mb | Accés restringit |